1. Wash with warm water. Pour enough warm water into the e-cigarette atomizer, shake it gently for one to two minutes, then pour out the water and blow it dry with a hair dryer. This method is very simple, but the previous e-cigarette oil taste will still remain.
2. Vinegar, put the atomizer into clean water mixed with vinegar, then stop boiling. After about ten minutes, wash it with clean water and blow it dry. It is a good choice to wash the e-cigarette atomizer with vinegar, and the effect is OK.
3. Coke, soak the e-cigarette atomizer in a cup of cola for 24 hours. After finishing, take it out and wash it with warm water, cold water, or boiling water. Finally, blow it dry. This method is very cumbersome and the effect is not very ideal. The previous smoke oil taste is still very strong.
4. Vodka, blow the atomizer dry, pour enough vodka, seal the atomizer mouth with your fingers, shake it gently for one to two minutes and then pour it out. Then rinse it with hot water and let it dry. Remember, it does not need to be blown dry, and the taste of vodka needs to disappear slowly. This is a very simple method, but it is indeed a relatively ineffective method, which can basically eliminate the dirt and taste on the inner wall of the electronic cigarette atomizer.
5. Tilt placement method, place a piece of paper towel flat on the table, tilt the atomizer below, and leave it for 24 hours. The smoke liquid in the electronic cigarette atomizer will slowly come out. Then rinse with warm water and finally blow dry with a hair dryer. This is also considered a relatively ineffective method. Of course, if you think the above methods are cumbersome, the most local tyrant way is to directly replace the atomizer, which saves time and effort.
